I am never too busy for any matching projects

Philip Yaghmai - Project Engineer

This Fixture was used during assembly of computer disk packs. The small diameter pins were used as guides to align disks’ ID’s while lowering them on to the fixture. Once all parts were stacked, the operator used the red handles to move the OD alignment posts against the disks. Triangular shaped cams pivoted around fixed pins exerting a slight pressure against the disks’ OD making sure they were aligned. The operator then would bolt down the pack, and finally proceed to pivoting the OD alignment posts away from the Disk Pack releasing it for lift off. 


Assembly Fixture


Assembly Fixture

BEY International LLC

Philip Yaghmai

1725 Loma Ave. #15

Long Beach,



Phone: 562-544-3923

Fax: 562-719-2692

E-mail: pyag@msn.com

E-mail: philip@projectengineer.com